|
Product Details:
Payment & Shipping Terms:
|
Model: | STA104WT-01 | Size (Inch): | 10.4 |
---|---|---|---|
Resolution: | 800×RGB×600 | Pixel Spacing: | 0.1905mm×0.0635mm (H×V) |
Color: | 65536 Colors (16 Bit) | Viewing Area: | 211.2mm×158.4mm |
High Light: | custom lcd module,tft display modules |
Beauty Machine TFT LCD Module 10.4 Inch with Full Colors and Touch Conrtrol
Technical Data
Model: STA104WT-01 (Advanced Type)
Physical Parameter |
Model: |
STA104WT-01 |
Size (Inch): |
10.4’’ |
|
Resolution: |
800×RGB×600 |
|
Pixel Spacing: |
0.1905mm×0.0635mm (H×V) |
|
Color: |
65536 colors (16 bit) |
|
Viewing Area: |
211.2mm×158.4mm |
|
Display Dimension: |
212.6 mm×159.8mm |
|
Overall Dimension: |
255mm×176.8mm×16.5mm(N)/18.5mm(T) |
|
Net Weight: |
765g(N)/805g(T) |
|
TFT Panel: |
A+ Level Industry Panel |
|
Touch Screen: |
Industry Level 4 wire resistance Or without touch screen is optional. |
|
|
||
Backlight Parameter |
Backlight Type: |
LED |
Brightness: |
700cd/m2 (Brightness can be adjustable in 100 levels.) |
|
Contrast: |
500:1 |
|
Backlight life: |
100000 hours |
|
Viewing Angle: |
70°/70°/50°/60°(L/R/U/D) |
|
Working Temperature: |
-30℃ ~ +85℃ |
|
Working Humidity: |
60℃,90% |
|
Storage Temperature: |
-30℃ ~ +85℃ |
|
Screen Mode: |
Digital |
|
|
||
Performance Parameter |
CPU: |
CortexM3 STM32F103 200MHz |
LCD Controller: |
CPLD EPM240 |
|
Refresh Rate: |
60Hz |
|
Picture Switching Speed: |
46 ms/picture (22 pictures/s) |
|
Flash Memory: |
Standard 2GB,Extension 4GB |
|
Memory Amount for picture: |
236 images |
|
Interface: |
RS232 /TTL UART Interface (Extend to RS485 so on.) |
|
Pictures downloading: |
MiniUSB2.0 (12Mbps) |
|
Voltage Range: |
DC4.5V ~ 35V (Typical value: 12V) |
|
Power: |
5.0W |
Test Report |
|
MTBF: |
4,250,000 H |
Working Temperature: |
-30℃ ~ +85℃ |
Air Humidity: |
60℃,90% |
Continuous Vibration Testing: |
10-55Hz,1.5mm,10G |
Impact Acceleration Testing: |
6ms,100G |
ESD Testing: |
10KV |
Radiation Reliability Testing |
44W |
Working Principle
The TFT-LCD Module communicates with the main controller via the command, then
the main controller would control the machine to work after receiving the commands.
Please note: The Main controller can be designed by engineer with Any MCU.
Product:
Tel: +86-755-29858730~305